Power Trowel on Commercial Jobs.

Same-Day Application, No Scrubbing, No Stripping.

Applying Protec III: Original on large power trowel floors is the easiest job you can get.

Simply apply product with a sprayer at 400 square feet per US gallon/10 litres per square meter across the entire surface once finishing is complete, and watch for puddles.

No scrubbing, cleanup, or sealing then removing a sealer is needed to cure and harden your surface.

Dustproof and Densify With Another Coat After Saw Cuts.

With Protec III: Original being a water-based and non-membrane forming product you do not need to wash the concrete after saw cuts before applying a second coat.

To apply a second coat for dust-proofing and extra hardness, simply apply the product after saw cuts at 400 square feet per US gallon/10 litres per square meter after removing most saw dust, do as many coats as desired, allowing all product to absorb and dry completely before applying more.

Your shop floor will be ready to walk on as soon as the product has absorbed.