Polishing Concrete.

Rinse Free, Ready-To-Use Densifier and Polishing Aid.

After cleaning the floor begin polishing with a 200 grit resin polishing pad, once you're done polishing clean the floor again, then apply Protec III: Original at 160 square feet per US gallon/4 square meters per litre.

Ensure that the floor remains wet for 20 minutes, spread product around to more absorbent areas every 10 minutes. Apply more product on fast-drying areas.

After all product has fully dried, equip blue nylon pads or diamond impregnated pads then buff the surface until you achieve your desired shine.

Use the same product for ultra-high shine polishing jobs.

Protec III Original can also be used to achieve higher shines for more premium floors.

After completing your starting polish with your 200 grit resin polishing pads, equip your 400 grit resin polishing pads.

Apply a light amount of Protec III: Original with a microfiber mop ahead of your polishing path for every polishing pad you intend to use until you’re finished polishing to your desired grit.

Clean the floor again with water and allow the floor to fully dry, then applying more Protec III: Original, Dual-Tech, or apply your preferred final coating.

After all product has fully dried, equip blue nylon pads or diamond impregnated pads then buff the surface until you achieve your desired shine.