Table of Contents:
Learn to Use it in 60-Seconds.
Prevent Surface Cracks in One Coat.
Spray-on before troweling wetcast.
Prevent surface cracks and cure in one spray-on coat.
Spray-on after placing drycast.
Apply after placing to prevent surface cracking.
Works Through Chemistry.
Works by reacting with the alkalis in cement. This cures it and prevents surface cracking.
White staining (Efflorescence) is also stopped after this reaction.
How To Apply:
On Wetcast:
Improves: Workability and finishing.
Reduces: Non-structural shrinkage cracks.
Wetcast Instructions:
Spray the product at a rate of 300 square feet per US gallon (7.4 square meters per liter) across the entire surface just before starting to power trowel.
Instead of using water, spray a bit more product if workability is needed.
After finishing, do not apply more product.
Finishing and Painting:
Treated concrete can have adhesives, coatings, or paints applied without removing the coating.
On Drycast:
Prevents: Non-structural shrinkage cracks, and white stains (efflorescence).
Drycast Instructions:
Spray the product at a rate of 200 square feet per US gallon (4.9 square meters per liter) across the top and sides just after extruding.
No troweling is required after spraying on drycast.